Polymer Tube Factory | Pipe production with PU Insulation | Smitflex

FLEXIBLE POLYMER PIPES  WITH FOAMED PU INSULATION SMITFLEX-P

CATALOGUE

OF SMITFLEX-P PIPES

RECOMMENDATIONS

OF PROJECTS

MANAGEMENT IN ASSEMBLY CONSTRUCTION

Polyethylene casing

Pressure pipe from polyethylene with higher temperature resistance PE-RT type 2

Protective layer

Foamed polyurethane

SMITHFLEX-P system of flexible heat insulated pipe is of a new generation, for application in underground with out a duct laying for both hot and cold water supply, with maximum working temperatures to 95°С with the inclusion of pressures of 1.0 MPA (allowing short interval working of temperatures to 116°С)

 

SMITHFLE-P is manufactured to BY 700360916.007-2015 for underground laying with the ability to withstand due to a protective coating direct or variable sun rays.

Long lasting pressure pipe of PE-RT type 2 of Dowlex mark 2388 product of the DOW chemical Company and mark Hostelen 4731, a product of the Lyondell Basell Company is used in the construction of SMITHFLEX-P pipes for the system of hot water supply and system of heated water to a working temperature of 95°C under constant working with a pressure of 10 atm, for over 50 years usage.

Delivery of SMITHFLEX pipes is made with the pipes reeled, with view to lessoning the number of joint connections and the time of the overall heat network construction

Construction with the inclusion of SMITHFLEX reflects on the ability to compensate in the Heat Networks pipe expansion, consequently avoiding the necessary use of compensation and non moveable anchoring

SMITHFLEX pipes are accounted correctly as may be used in non duct laying, for which reason necessarily convenient in the heat networks laying in existing ducts, in the case of reconstruction, also avoiding intrusive elements

Flexible pipe SMITHFLEX allows laying with the avoidance of building obstructions, such as communication cable pipes, foundations etc

SMITHFLEX pipes do not allow outside or inside corrosion. Their manufactured inherent ability allocates them as suitable for the full term of their exploitation

Pipe SEMIFLEX-P has a flexible pressure pipe made of polyethylene of raised temperature resistance

PE-RT type 2

For the manufacture of the sheath casing polyethylene mark PE 80 is used or other mark of low pressure polyethylene of low and medium density, of imported manufacture with added stabilizers.

SYSTEM OF REMOTE CONTROL OPERATIONS

We include all pipes and auxiliary selections in foamed polyurethane systems in a remote control system (SODK). This system allows for the signalization in the case of vapor appearance in the heat network at an early stage and also indicates the point of vapor in the pipes heat network.

CATALOGUE

OF SMITFLEX-P PIPES

RECOMMENDATIONS

OF PROJECTS

MANAGEMENT IN ASSEMBLY CONSTRUCTION